Fusion Bumpers

Fusion Bumpers Add Rugged Style and Heavy-Duty Function to Your Truck

If you're looking to complete the custom look of your truck, then Fusion Bumpers is your beginning and end, literally.

Fusion Bumpers is the manufacturer of Front and Rear Bumpers, that are complete bolt-on products, with (HD) heavy-duty mounts and all the mounting hardware necessary to replace your truck's stock bumpers. Each bumper is custom-ordered and custom made, from American steel and materials, in their facility in Payette, Idaho. The bumpers not only provide a rugged look to your diesel truck, but add heavy-duty function, as well as being a base for mounting front-end and back accessories, such as light bars, winches, brush guards, fog lights, front receiver hitches and rear back-up lights. Front and Rear Bumpers are available for Dodge, Ford and GM full-sized trucks, in several finish options, including (4) powder-coated choices, a sandblasted and primed option, and raw steel - for those that want to handle the total customization on their own.
The exponential options and possibilities in building a custom diesel truck can be staggering, and to streamline a portion of the process, OCDiesel.com has created the best and easiest-to-use portal for ordering Fusion Bumpers.

1. Go to OCDiesel.com's Fusion Bumper category page
2. On the Fusion Bumper category page, look to the left and choose your vehicle under "Refine Search"
3. Once you have clicked your vehicle, scroll down a little bit and choose either the front or left bumper, that corresponds to your truck.

For Front Fusion Bumpers

1. Choose Your Lighting Options:
• No Lights or Mounts - Please note that the holes for factory fog lights will be cut into the bumper)
• Light Mounts - You may have another source for light, but want the mounts added, ready for installation of your own lights
• Lights and Mounts - For those who want a hassle-free approach to adding light bars or additional fog lights, this is the best alternative, as bumper, mounts and lights will be guaranteed to work with each other.
2. Choose Brush Guard Option (Please note that Ford Trucks will include the Defender Brush Guards while Dodge and GM Trucks will have a tubular brush guard and headlight guard.
3. Choose Additional Options and Accessories, such as Front Receiver Hitch or Winch Mount (Please note that Front Receiver Hitch and 10" Center Light bar, located in the center of the bumper cannot be ordered together.
4. We ask that you enter your vehicle information, so we can verify a proper bumper to truck match
Almost done . . .
5. Choose Bumper Finish:
• Raw Steel - which allows you to completely customize your bumper to the theme and paint of your truck
• Sandblasted and Primed in a Grey Primed Finish
• Powder coat Light Gray (Textured)
• Powder coat Dark Gray (Textured)
• Powder coat Black (Textured)
• Powder coat White (Textured)

For Rear Fusion Bumpers

1. Choose Your Lighting Options:
• No Back-up Lights
• Back-up Light Mounts (For pre-existing lights - no charge)
• Back-up Light Kit with either KC or Rigid Lights
2. Choose License Plate Light Kit
3. We ask that you enter your vehicle information, so we can verify a proper bumper to truck match
And Lastly . . .
4. Choose Bumper Finish:
• Raw Steel - which allows you to completely customize your bumper to the theme and paint of your truck
• Sandblasted and Primed in a Grey Primed Finish
• Powder coat Light Gray (Textured)
• Powder coat Dark Gray (Textured)
• Powder coat Black (Textured)
• Powder coat White (Textured)

*BUMPERS SHIPPED BARE STEEL WILL NEED EITHER A TEXTURED POWDER COAT, RHINO-LINED, OR PRIMED AND PAINTED. SMOOTH POWDER COAT WILL NOT LOOK GOOD DUE TO THE WELDS BEING GROUND DOWN, as stated directly from Fusion Bumpers

Once your Fusion Bumper or Bumpers have been ordered and checked for vehicle match, the custom process begins . . . and approximately six weeks later, you'll have you custom bumper ready to install or ready for your own customization. Installation is quick and easy with regular hand tools and attaches to the factory bumper mounts. Of course, if you ever have any questions, from beginning to end, front to rear, OCDiesel.com is ready to offer free advice during the whole Fusion Bumper process, from ordering to installation.
Want to show off your customized truck, complete with Fusion Bumpers, then send us some pics and we'll gladly post them for other diesel enthusiasts to see.

Titan's Spare Tire Auxiliary Fuel System - STAFS

So Simple Yet Innovative - An Additional Diesel Fuel Tank as the Spare Tire

One of the newest innovations to come from the leading diesel fuel tank manufacturer, Titan Fuel Tanks, is the Spare Tire Auxiliary Fuel System (STAFS™). This revolutionary fuel system adds an extra 30 gallons to your diesel truck’s fuel capacity. In most cases, these will double the amount of fuel when combined with American-made diesel truck stock tanks. Double the amount of fuel means double the amount of travel before a refueling. As almost every diesel truck owner knows, gas stations carrying diesel are few and far between. Taking a long trip means planning out your stops or scouting the off-ramps for places that can quench your truck’s thirst . . . this usually leads to stretching out the fumes left in your reserve or filling up when not really needed. The Spare Tire Fuel Tank is perfect for trucks with custom wheels and larger tires, where the spare tire has been rendered useless, compared to the custom tires, and only taking up underbody space.


Titan’s simple, yet revolutionary idea, re-purposes this space to add 30 gallons of diesel fuel, accessible on-the-go. One touch of the button starts the fuel transfer and an illuminated display shows fuel levels all from the in-cab controls. Like all Titan Diesel Fuel Tanks, the STAFS tank is made from ¼ inch thick military grade cross-linked polyethylene (XLHDPE). According to Titan, XLHDPE is a space-age material designed to perform in any condition – from extreme hot to frigidly cold. The term 'cross-linked' means that the molecular chains that make up the polymer are chemically bonded together, or 'bridged', to form a continuous, three-dimensional structure. This allows stress and impact energy to be spread throughout the infinite chain of molecules. In other words, TITAN Fuel Tank’s innovative cross-linked structure makes it 20 times more durable than linear-polyethylene, like the stock (OEM) tanks on a truck. Proof that Titan’s Fuel Tanks are near invincible comes from the U.S. Department of Defense, which utilizes the very same processes, materials and expertise for fuel storage in many front-line, combat vehicles.


The Spare Tire Auxiliary Fuel System comes with the Auxiliary Fuel Tank, all mounting hardware, valves, hoses & pumps, and an electronic fuel transfer monitor, integrated with a control unit. Also included with the fuel tank system is a universal filler kit mated with an attractive brushed aluminum filler door. Detailed instructions and a fuel door assembly mounting template gives you the option to install the filler door assembly on the truck’s exterior sidewall or on the inside wall of the truck’s bed. No matter the bed length or cab style the STAFS system can be installed on most American-made diesel pickup truck models built after 1999. As a special note, an LB7 Kit is required for any 2001-2004 GM Truck with an LB7 transmission. Also, TITAN’s STAFS system can only be installed on vehicles equipped with heavy Class V (5) hitches, which are standard on most full-sized diesel trucks. Fractions of an inch apart, between Dodge Cummins, GM Duramax and Ford Powerstrokes, the Spare Tire Fuel Tank hangs about 2.5 inches lower than the factory spare tire. TITAN’s™ Spare Tire Auxiliary Fuel System (STAFS™) is highly recommended for any truck owner looking to increase the range between diesel fuel stops.

Expert Tips:
The Spare Tire Diesel Fuel Tank, when filled weighs approximately 250lbs. The weight combined with the mounting location will help reduce truck bed bounce.

The Driver Information Center (DIC) will continue to be accurate with the stock tank, however will not calculate fuel in the secondary tank until transferred to the stock tank.

Titan also makes a Spare Tire Buddy for those that have a matching spare to the larger wheels & tires. It allows the spare to be mounted just about anywhere in the truck bed, securing to the rails of the truck bed walls.

FASS Duramax Flow Enhancer Install 01-12 Duramax Part 2

The FASS Duramax Flow Enhancer series designed for the 2001-2012 Chevrolet Duramax 2500 and 3500 is available at Orange County Diesel in Huntington Beach, California. If you have any questions about any other FASS product, or if you need expert assistance installing your FASS Platinum, feel free to call and speak to a FASS service professional at 714-848-2170.

This is Part 2 of a model-specific four-part series about how to install a FASS Duramax Flow Enhancer.

The 2001-2010 installation steps are very similar to the 2011-2012 Duramax's installation. The steps specific for the 11-12 installation are in green, and the steps unique to the 01-10 installation are in blue.

Please find the links to Part 1, Part 3, and Part 4 here.

Step 2: Prepare suction and feed lines.

Remove the 3 bolts holding the fuel cooler to the mounting bracket. The fuel cooler is located in front of the fuel tank.

Using a fuel line disconnect tool, disconnect the factory suction line located above the fuel cooler. Place the disconnect tool around the fuel tube and slide the tool under the fuel line connection to release the fuel line.

Pull the red square tab out and push in the rounded tab, releasing the fitting from the steel-beaded feed line.

Using oil, insert PLB-1212 into one end of the provided FL-1002 fuel line. Feed line over frame to the stock fuel connection.

Push the PLB-1212 into the factory suction line until you hear a click and the tabs are locked in place. Slide square tab back in to secure.

Using an HC-1001 hose clamp, insert the QD-1002 into the other end of the provided FL-1002 fuel line and secure.

Oil the rings inside the QD-1002 and slide over the factory feed line until you hear a click. Do not cut the line at this time.

Oil the rings inside the QD-1002 and slide over the factory feed line until you hear a click. Do not cut the line at this time.

FASS Duramax Flow Enhancer Install 01-12 Duramax Part 3

The FASS Duramax Flow Enhancer series designed for the 2001-2012 Chevrolet Duramax 2500 and 3500 is available at Orange County Diesel in Huntington Beach, California. If you have any questions about any other FASS product, or if you need expert assistance installing your FASS Platinum, feel free to call and speak to a FASS service professional at 714-848-2170.

This is Part 3 of a model-specific four-part series about how to install a FASS Duramax Flow Enhancer.

The 2001-2010 installation steps are very similar to the 2011-2012 Duramax. The steps specific for the 11-12 installation are in green, and the steps unique to the 01-10 installation are in blue.

Please find the links to Part 1, Part 2, and Part 4 here.


Step 3: Mount FASS Fuel Pump

Position FB-4002 bracket to mounting location on the cross member directly in front of the fuel tank making sure there are no obstructions.

Position system to mounting location on the cross member directly in front of the fuel tank making sure there are no obstructions. The pump should be mounted parallel to the frame.

Make sure the mounting holes are not located on the radium bend of the cross member. Using template, mark holes. Pre-drill with 1/8" bit and final drill with 5/16" bit.

The weep hole must face down for proper pump operation. Any other direction will void your warranty.

Mount pump to the cross member using 5/16" bolts.

Reach between the cross member and the bed to install the 3 bolts and tighten with a 1/2" socket.

The DIPF fitting does not require sealant on it’s threads. It is an O-ring sealed fitting. Install two DIPF-1003 fittings into the Inlet/Outlet ports on the DMAX. Torque to 18 ft./lbs.

Connect the male end of the wire harness to the female electrical connector on the FASS pump. Turn key to the “On” position. With the FASS pump on, squirt a liberal amount of WD-40 or other lubricant into the Inlet port. This procedure will “wet” the Gerotor and allow for better suction during initial priming.

FASS Duramax Flow Enhancer Install 01-12 Duramax Part 1

The FASS Duramax Flow Enhancer series designed for the 2001-2012 Chevrolet Duramax 2500 and 3500 is available at Orange County Diesel in Huntington Beach, California. If you have any questions about any other FASS product, or if you need expert assistance installing your FASS Platinum, feel free to call and speak to a FASS service professional at 714-848-2170.

This is Part 1 of a model-specific four-part series about how to install a FASS Duramax Flow Enhancer.

The 2001-2010 installation steps are very similar to the 2011-2012 Duramax. The steps specific for the 11-12 installation are in green, and the steps unique to the 01-10 installation are in blue.

Please find the links to Part 2, Part 3, and Part 4 here.

Step 1: Install electrical harness.

Crimp the ring terminals to the red and green wires of the WH-1006 Wire Harness. Attach red wire to the positive terminal of the battery and the green terminal to the negative terminal.

Secure relay and fuse in an upright position, as shown, to prevent moisture from entering. Di-electric grease may be applied to prevent corrosion.

Guide the single red wire from the relay to the engine bay fuse panel.

Guide the single red wire extension through the fire wall grommet to the fuse panel.

Using the fuse tap and flag terminal, connect the red lead to a terminal on the circuit board that is “hot” when the key is on. Route WH-1006 wire harness along frame rail to mounting location of pump.

FASS Duramax Flow Enhancer Install 01-12 Duramax Part 4

The FASS Duramax Flow Enhancer series designed for the 2001-2012 Chevrolet Duramax 2500 and 3500 is available at Orange County Diesel in Huntington Beach, California. If you have any questions about any other FASS product, or if you need expert assistance installing your FASS Platinum, feel free to call and speak to a FASS service professional at 714-848-2170.

This is Part 4 of a model-specific four-part series about how to install a FASS Duramax Flow Enhancer.

The 2001-2010 installation steps are very similar to the 2011-2012 Duramax. The steps specific for the 11-12 installation are in green, and the steps unique to the 01-10 installation are in blue.

Please find the links to Part 1, Part 2, and Part 3 here.

Step 4: Install fuel lines

Route suction line from Step 2d to the Inlet port. Cut FL-1002 to needed length.

Using oil, insert PL-2003 and connect to the DIPF-1003. Torque to 18 ft./lbs.

Install in-line fuel filter in an accessible location in the suction line using the HC-1001s. Make sure the fuel flow travels the direction of the arrow on the canister.

Measure from the factory feed connection from Step 2e to the Outlet port of the FASS pump. Cut and insert PL-2003.

Connect to the Outlet DIPF-1003. Torque to 18 ft./lbs. Secure all fuel lines and electrical harness with wire ties.

FASS HD Install Class 8

The FASS HD series designed for Class 8/Semis is available at Orange County Diesel in Huntington Beach, California. If you have any questions about any other FASS product, or if you need expert assistance installing your FASS HD, feel free to call and speak to a FASS service professional at 714-848-2170.

The FASS HD shares the same installation steps as the FASS Platinum for Class 8 applications. Please find the links to Part 3, Part 4, and Part 5 here.

Step 1: Installing electrical harness.
The installation of the electrical harness is done first, allowing power to be applied to the pump for lubrication purposes. Use of corrosion preventative spray and dielectric grease is recommended where electrical connection is made.

Select best location in firewall for passage of wiring harness from cab to engine compartment. Find or drill a 7/8” hole in firewall. Install RS-2684 grommet for ease of installation and protection of wire harness. Route red wire/ loom of the WH-1001 wire harness through the grommet in the fire-wall to the ignition or fuse panel.

Using a spade terminal, connect the "Red" lead to the "ON" terminal of the ignition switch on the circuit breaker board that is "hot" when the key is on.

Using a spade terminal, connect the green wire of the wire harness to the negative post of the battery or clean ground. Secure fuse out of the weather, then secure all electrical leads and harness.


The steps presented here in Part 2 are ONLY to be used as a guideline, as your application may be different.

Use thread tape or pipe sealant on ALL male pipe threads, do not use on male flared AN fittings.

Remove primary fuel and/or water separator. If primary filter is part of the fuel pump, ignore this step.

ONLY if a 90° fitting is to be used, follow these steps: Remove 4 bolts holding upside-down T Block pump assembly to the FASS filter base. Pay attention to the O-rings and ball. Remove fuel manifold and assemble 90° fitting directing it in the correct direction. Reassemble fuel manifold then pump assembly to FASS filter base, seating all O-rings & the ball in their proper place. Torque to 110 in./lbs.

Attach BR-2001 to back of system using the spacers and 1/4" bolts. Use the 2 shortest on the system base.

Position system where it will be mounted. Mark the 4 mounting points using the template located in the table of contents. Prior holes may be used. Drill these marked locations with a 13/32 bit.

Prior to installing pump, connect wire harness and turn on pump. Spray liberal amount of WD-40 or similar lube into water separator nipple. This wets the Gerotor and allows for easier initial priming. Assemble to frame using the (4) 3/8" bolts & flange nuts placing the RS-1001 between the frame and bracket.

Apply motor oil to O-rings located on filters. Attach to system and torque appropriately.