Wednesday, June 20, 2012

FASS Duramax Flow Enhancer Install 01-12 Duramax Part 4

The FASS Duramax Flow Enhancer series designed for the 2001-2012 Chevrolet Duramax 2500 and 3500 is available at Orange County Diesel in Huntington Beach, California. If you have any questions about any other FASS product, or if you need expert assistance installing your FASS Platinum, feel free to call and speak to a FASS service professional at 714-848-2170.

This is Part 4 of a model-specific four-part series about how to install a FASS Duramax Flow Enhancer.

The 2001-2010 installation steps are very similar to the 2011-2012 Duramax. The steps specific for the 11-12 installation are in green, and the steps unique to the 01-10 installation are in blue.

Please find the links to Part 1, Part 2, and Part 3 here.

Step 4: Install fuel lines
Route suction line from Step 2d to the Inlet port. Cut FL-1002 to needed length.
Using oil, insert PL-2003 and connect to the DIPF-1003. Torque to 18 ft./lbs.
Install in-line fuel filter in an accessible location in the suction line using the HC-1001s. Make sure the fuel flow travels the direction of the arrow on the canister.
Measure from the factory feed connection from Step 2e to the Outlet port of the FASS pump. Cut and insert PL-2003.
Connect to the Outlet DIPF-1003. Torque to 18 ft./lbs. Secure all fuel lines and electrical harness with wire ties.

No comments:

Post a Comment