FASS Titanium Install 99-04 Ford Powerstroke 6.0L, 7.3L Part 2

The FASS Titanium series designed for the 1999-2004 Ford Powerstroke 6.0L/7.3L is available at Orange County Diesel in Huntington Beach, California. If you have any questions about any other FASS product, or if you need expert assistance installing your FASS Platinum, feel free to call and speak to a FASS service professional at 714-848-2170.

This is Part 2 of a model-specific four-part series about how to install a FASS Platinum fuel system.

Please find the links to Part 1, Part 3, and Part 4 here.

Step 2: Prepare Suction and Return Line

Please be sure that there is enough tube on each side of the cut to insert the RM-1002 and to place the hose clamps.

Mark location on the filler tube that allows you to install RM-1002. Cut tube.

Position RM-1002 with the junction pipe aiming to outside of bed. Connect rubber and RM-1002 using both HC-1004's. However, please do not tighten.

Connect FL-1001 to the junction of RM-1002 using a HC-1001.

Disconnect the factory suction line by pinching in on the side tabs. Be sure to thoroughly clean the suction port.

Insert QD-1001 and clamp into opposite end of fuel line. Oil O-rings inside QD-1001. Slide onto factory suction port until a click is heard. Loop fuel line over frame. Do not cut at this time.