FASS Titanium Install 98.5-04 In Tank Lift Pump, 05-12 Dodge Cummins 5.9L, 6.7L Part 1

The FASS Titanium series designed for the 2005-2012 Dodge Cummins 5.9L/6.7 L and the 1998.5-2004 Dodge with in tank lift pump is available at Orange County Diesel in Huntington Beach, California. If you have any questions about any other FASS product, or if you need expert assistance installing your FASS Platinum, feel free to call and speak to a FASS service professional at 714-848-2170.

This is Part 1 of a model-specific four-part series about how to install a FASS Platinum fuel system.

Please find the links to Part 2, Part 3, and Part 4 here.

Step 1: Install electrical harness.

The electrical harness is installed first in order for power to be applied to the pump for lubrication purposes.

Using ring terminals, attach red wire of the WH-1004 to the positive battery terminal. Attach green wire to a clean ground, preferably the negative battery terminal. Secure fuse block in a location protected from outside elements.

Secure Relay in an upright position, as shown, to prevent moisture from entering. Di-electric grease may be applied to prevent corrosion.

Route wire harness along frame to the approximate mounting location near the fuel tank.