FASS Titanium Install 98.5-04 In Tank Lift Pump, 05-12 Dodge Cummins 5.9L, 6.7L Part 4

The FASS Titanium series designed for the 2005-2012 Dodge Cummins 5.9L/6.7 L and the 1998.5-2004 Dodge with in tank lift pump is available at Orange County Diesel in Huntington Beach, California. If you have any questions about any other FASS product, or if you need expert assistance installing your FASS Platinum, feel free to call and speak to a FASS service professional at 714-848-2170.

This is Part 4 of a model-specific four-part series about how to install a FASS Platinum. 

Please find the links to Part 1, Part 2, and Part 3 here.  

 

Step 4: Install fuel line.

Only use sealant on threads installed into pump assembly.

Route suction line to “T” port. Cut FL-1002 to length. Insert PL-1005 in line using oil. Attach to 10-299. Torque to 18 ft./lbs.

Route fuel line from the "R" fitting of the suction tube assembly to the "R" port on the FASS system with a gentle bend. Cut and insert the PL-1005 fitting to the hose. Use oil. Attach fitting to the "R" port. Torque to 18 ft/lbs. Insert PL-1005 in remaining fuel line. Connect to the "E" port of the FASS system. Use oil. Torque to 18 ft./lbs. Route this line up to the injection pump.

Disconnect factory fuel line from inlet side of the factory injection pump and install the DIPF-1003 fuel fitting. (This is where the fuel line from the fuel filter housing enters the injection pump.) Torque to 18 ft./lbs.

Cut fuel line to length and insert PL-2003 90° (or PL-1005 for 2011) fitting using oil. Attach to DIPF-1003. Torque to 18 ft./lbs.